HSS annular cutter, 20 x 50 mm

Description

Diameter: 20 mm

Total length: 50 mm

100% Faster- Speed and time savings are achieved due to the following factors.

– Firstly the annular cutter principle of only – cutting material from the periphery of the hole as opposed to the twist drill which must cut the complete diameter of the hole.

– Secondly the benefit of two aggressive sharp angles per cutting edge help to achieve faster feed rates and lower cutt-ing resistance.

• 30% More productivity – Because the annular cutter is only cutting material from the periphery of the hole.

• Less motor energy and driving power is required. The larger the drill diameter the greater the energy saving.

• Longer life time – The annular cutters cutting edges do less work than the twist drill resulting in more holes between sharpening.

• Thick 6 mm body together with special tooth geo-metry ensures high stability and reduces to a minimum the risk of breakage due to overloading.

• Thick walled HSS annular cutters for increased durability and life time.

• With standard 19 mm Weldon reception.

• 50 mm depth of cut.